Sprache:Deutsch


S2

S2 – The workhorse

  • S2 is our most versatile dental milling machines. It has five simultaneously working axes, a blank changer for 8 blanks and is designed for dry machining as well as for wet

  • machining. As a variant without blank changer, we offer the S1. Both machines are prepared for connecting the wet grinding module. Thus you can grind all common glass ceramic types.



    1. 8 Blanks
    1. 24 Blocks
    1. 48 Abutments
S2 working chamber
non-stop machining

  • Features

  • 5 simultaneously working axes

    The second rotary axis (B axis) with a rotation range of up to ± 30 degrees enables you to mill undercuts and so opens up new machining possibilities.


    Non-stop machining thanks to 8-fold blank changer

    You fit the changing station with blanks via a smaller additional front cover. The proper blank for your milling job is inserted into the fixing device automatically when required. So the machine can mill around the clock and no operation steps have to be performed.


    Machine bed of massive aluminium cast

    Thus these machines gain much stability at minimal exterior dimensions. Moreover, vibrations are reduced and the mechanics is optimally protected.


    Automatic changer for 16 tools

    In addition to the currently required tools, you can equip the tool changer with replacement tools right away. Thus you can continue working without interruption if a tool is worn out. The haptic tool measurement enables the usage of diamond-coated tools.


    Worldwide applicable

    Due to far range switching mode power supply for 100 – 240 V and 50/60 Hz with country-specific mains plug. Certification according to ANSI/UL 61010-1 for exports to the USA and Canada.


    Sophisticated protective mechanisms

    Protection of the danger zone during the machining process due to an automatic safety interlock at the frontcover. Protection of the mechanics against dust and chippings as well as reduced wearing and maintenance effort due to integrated working chamber sealing air concept.


    Wide range of materials and indications

    Machining of plastics, wax, PEEK, zirconium oxide and composites up to non-precious alloys on cobalt-chrome basis and glass ceramics. For crowns, bridges (also fully anatomical), inlays, onlays, abutments, telescope crowns, model plates, model casts, bite splints, model plug-in teeth, implantbars, veneers, table-tops, etc.


    Powerful and highly precise synchronous spindle

    With 4-fold hybrid ceramic ball bearings and a nominal power of 300 W under continuous load.


    No previous knowledge necessary

    Very easy operation via provided CAM software DentalCAM with Direct-Mill function – no previous knowledge in milling and grinding necessary.



S1 – without blank changer

S1



Wet grinding option


  • S1 and S2 are prepared for connecting the wet grinding module. There are liquid nozzles already mounted at the spindle so that the tool will be optimally cooled while grinding. Thus you

  • can also grind materials like glass ceramics (VITABLOCS® Mark II, VITA ENAMIC®, VITA SUPRINITY®, IPS Empress®, IPS e.max®).




  • Features

  • Sophisticated system for liquid treatment

    Liquid treatment with triple filtering by integrated coarse filter, flat folded filter and fine filter; a contact-less ultrasonic sensor measures the exact liquid level.


    New machining possibilities

    Materials like glass ceramics which can only be wet ground complete the list of machinable materials.


    Worldwide applicable

    Due to far range switching mode powersupply for 100 – 240 V and 50/60 Hz with country-specific mains plug. Certification according to ANSI/UL61010-1 for exports to the USA and Canada.


    Intelligent labyrinth air guiding system

    No machine changeover necessary when switching between wet and dry machining due to patent pending intelligent air circulation system by labyrinth air guiding system. The regularly used dry vacuum cleaner simply has to be connected to the wet grinding module instead of to the machine.


    Best surface quality – short grinding times

    Due to the rigid construction of the Impression S models and the highly precise spindle you will achieve high-class results by using the cooling lubricant vhf Tec Liquid and the appropriate vhf grinding tools. For instance, it is possible to grind a fully anatomic crown of the materials IPS e.max® or VITABLOCS® Mark II within approximately 25 min.





Dear end customers,
our dental milling machines and dental grinding machines are exclusively sold via OEM partners and specialised trade.
If you are interested, please directly contact our sales partners.