A key feature of this special vacuum table is that it can also be used for milling works, e. g. fretworks or outline contours. With most vacuum tables, it is not possible to cut completely through the workpiece; time-consuming reworking measures like manual separation and deburring follow.
However, this special vacuum table makes these measures obsolete, because it is protected by a special vacuum fleece or a perforated rubber mat. They can be replaced from time to time.
Thanks to the large vacuum chamber, the workpiece will still be fixed reliably even if some areas of the table are not covered. The special vacuum table reduces the time for the workpiece exchange to a few seconds; you can’t fix your workpieces in a more elegant way.
- size: from 250 x 300 mm to 2,000 x 3,000 mm
- height: 63 mm
- more than 9,500 holes/m²
- vacuum fleece or adaptor mats for different kinds of applications available
- vacuum suction unit (1,200 W, suction volume 144 m³/h, 227 mbar negative pressure); number of necessary units depending on the size of the vacuum table
Scope of delivery
- special vacuum table with suction unit
- suction hose with connecting pieces
- basic equipment vacuum fleece
The Active Pro Line is already equipped by standard with a special vacuum table.
Table size and total suction volume
|Table size in mm||Volume in m³/h||Suitable for system|
|250 x 300||144||CAM 100 Classic|
|500 x 500||144||CAM 200/220 Classic, CAM 0505 Premium|
|500 x 750||144||CAM 250 Classic|
|1.000 x 500||288||CAM 1005 Premium|
|1.000 x 1.000||288||CAM 1010 Premium|
|1.000 x 1.250||288||CAM 450 Classic|
|1.000 x 1.500||288||CAM 1015 Premium|
|1.000 x 2.000||288||CAM 1020 Premium|
|1.500 x 1.000||432||CAM 1510 Premium|
|1.500 x 2.000||432||CAM 1520 Premium|
|1.500 x 2.500||432||CAM 1525 Premium|
|2.000 x 1.000||576||CAM 2010 Premium|
|2.000 x 1.500||576||CAM 2015 Premium|
|2.000 x 2.500||576||CAM 2025 Premium|
|2.000 x 3.000||576||CAM 2030 Premium|
Suitable machine lines
We are here to help you